Wednesday 31 December 2008

snowy christmas walk

We went for a short hiking trip to Niemipuro between Christmas and new year, we wanted to go there by skiing, but there just wasn't enough snow.

There is this nice little cabin there. The cabin is quite small, but this is an advantage in heating up the inside. When its -15°C outside its nice to be able to heat it up to above 10°C

Inside is quite dark (unlike the way it looks in my images lit by my flash) but is very comfortably (if spartanly) appointed.

One of the things which is fantastic in Finland (and I also found the same in Northern Sweden) is that people actually leave useful items (like candles, matches and tins of food) behind in the cabin. This can be handy if you happen to stumble in with not much.


Inside the cabin on the opposite wall from the door there is a raised platform which is intended for sleeping on. Keeping people off the floor is handy as it not only keeps sleeping bags warmer but cleaner!

As well, the platform is covered with 3mm thick high density foam just like many camping mats. So even if we didn't have our mats with us we'd have been able to sleep warmly enough.

I thought you might like a quick look around the inside the cabin. Looking back towards the door you can see there is a small bench table beside the window, a box of firewood and plenty of places to hang your gear.

Its nice that these places are right around the heating stove ...

which helps them dry out! There is enough room inside the cabin for 6 people to sleep.



The cabin is more or less on the bank of the river, so its not hard to then drag yourself out of the sleeping bag to admire a beautiful sunrise (assuming its not overcast like 99% of the days in Finland)

dawn at Koitajoki

Tuesday 30 December 2008

merry christmas

To all those who visit here ...

all the best from Sunny Suomi ;-)

Tuesday 9 December 2008

ode to spelling checker

This lovely piece deserves to remain forever fresh on the internet.

Ode to the Spell Checker.


Eye halve a spelling chequer
It came with my pea sea
It plainly marques four my revue
Miss steaks eye kin knot sea.

Eye strike a key and type a word
And weight four it two say
Weather eye am wrong oar write
It shows me strait a weigh.

As soon as a mist ache is maid
It nose bee fore two long
And eye can put the error rite
Its rare lea ever wrong.

Eye have run this poem threw it
I am shore your pleased two no
Its letter perfect awl the weigh
My chequer tolled me sew.

Arthur On Gnome




.. I don't know who to credit for this one

Saturday 6 December 2008

goodbye koalas

I read in a recent article in the Australian that the Koala population in south east Queensland has declined some 40%. Politicians seem to be distressed by this. According to that article "It is believed there are less than 20,000 koalas now in the wild in southeast Queensland."

and that some recognition of this being related to urban development

"The State Government will also work with local governments to draft a new local law for development approvals to ensure dogs and koalas are kept apart, with suggestions including kennelling dogs at night, new fencing regulations and no dog provisions in new estates."

Some years ago (around 1995) back in South East Queensland people united against a road development in areas of Koala habitat and at the election ousted the government supporting it.

Its lovely to see such concern for the environment (although it seems likely that some motivation may have come from opportunistic politics).

But soon after that the area seems to have been heavily developed by urban sprawl (perhaps more habitat destroying and threatening than the roads).

Ironically the Koalas would probably be alive today if the road had gone through.

No one seems to want to alter the nature of urban development, despite general agreement that its both costly and increasingly difficult to provide infrastructure to these sprawling urban areas.
So while roads are not allowed to threaten the Koala population that relentless urban development is. So areas just around where I live which were once like this:



are bull dozed over and turned into this:




There are certainly other models of development than this, which if we are to live in the area and not destroy the very reasons we find it beautiful need to be explored.

This will require planning and community involvement. I hope that this can happen so that we don't have to say good bye to both the Koalas and the natural beauty of the region.

Please go visit the Koala Foundation and give Deborah Tabart a hand!

Thursday 20 November 2008

economic fallout

I'm no Economist but,

it seems that consumer confidence (aka willingness to spend more than you earn) is down in the wake of the financial crisis. It seems also that this is in turn hurting the economy (the lack of spending that is).

So, what would have happened if all the people advocating "sustainable development" (people like me) had been listened to? I mean if people did things like:
  • rode their bicycle to work instead of using the car for 4km
  • their kids rode their bicycles to school (instead of being dropped off in v8 and v6 fuel using cars non-town cars like Commodores, Falcons, Pajeros, Range Rovers ...)
  • people didn't buy the latest in fad fashions for no reason
  • we bought products which were built to last (like my grandmothers singer sewing machine) rather than buying another GMC power drill for $15 because the last one burnt out too
  • we made our cars truly repairable (rather than $50,000 items which depreciate to $3000 items in a few years and we then don't see the logic in replacing a spare part for $700 {which in all honesty is probably worth $15} so we ditch the car)
  • we followed our grand parents advices and didn't get into debt, invested our savings and bought wisely
I'm guessing that the "recovery" would probably take even longer.

Well if you did like the above you'll be in a good position to take advantage of the current crisis and pick up some bargains in stock market "fire sales" of quality but presently undervalued stocks (banks come to mind).

I think that if we had all followed this way then most of the "economic" growth which has bubbled and burst would not have happened, and that we'd be moving along comfortably but with out making anywhere near as much mess as we presently are.

So perhaps we'd have avoided this boom / bust cycle in the first place?

Sure, we might not have all the fancy stuff we have now, but just how crucial are your latest Telemark skis and Garmont boots to your happiness anyway? I'm still using 6 year old computing to write this essay and (since its not running the latest hottest bloat ware) its working fine thank you very much. {faster in fact than my friends newest thing with Vista holding it back}. I still use a film camera as well as a compact digital camera (which cost nearly $1000 when it was new in 2001).

Why? Well because I already had a 35mm camera (which still makes quite good images thank you very much) and I bought the compact to make my "snapshots" an easier thing and because I often email or need to send images quickly. In all honesty my 2001 5MPixel Coolpix camera is still way overkill for email and WWW needs and ultimately needs to be rescaled (like who wants to see just the corner of the image?). If I take "nice shots" which I want to print (like below) I'll still use film.

moss


Perhaps the $1000 seems high but perhaps that's its real value when its not being "supported" by a rapid-turn-over consumer pays for on-the-fly research with subscribing to a new model every year one? Besides, how much would it cost (even now with DSLR cameras being dirt cheap compared to their real prices) to move my film outfit to comparable digital? Many more thousands.

but as has been said many times ... if history repeats itself so often what does this say about humanity's ability to learn? We're pretty stupid if you ask me.

Tuesday 18 November 2008

tone mapping for the lazy photographer

I don't mind the look of HDRI, but then it is often a look not something which seems natural (although that depends on the artist). HDRI properly needs at least 2 spaced exposures of the same scene. This can be a problem, as it requires a tripod to best ensure that the camera doesn't move between shots and even then the subject can move between shots (like clouds) introducing annoying artifacts.

But those issues aside tone mapping tools which come with products like photomatix are very handy tools for the lazy Photoshop photographer, expecially because you only need one exposure. Think of it as a quick version of the sort of "dodge and burn" that a professional dark room worker would have done for your negative in the past.

So for example on a trip to India I (fortunatly) took most the images using RAW capture on my camera, I did this thinking that RAW is my negative and as processing software improves I'll be able to benefit from these advances and process my images better (than if I'd only kept JPG). Take this image:


A quick run through tone mapping improves the look well beyond what I could do without some hours of fiddling in a photo editor like Photoshop. At first glance it seems like its just been brightened, but it goes beyond that ... the clouds are no brighter and look at the shadow details in the area under the trees to the right, and the colours it can pull out in the crowd up on the left near the Taj itself.


Its stunning isn't it! So, if you didn't already have enough reasons to set your camera on RAW, then here's just one more :-)

I'll put another example below just to leave you with the idea. But try it, it'll help you pull more out of some of your RAW images with less effort.

Friday 14 November 2008

racism

I often struggle with this concept. I find myself feeling that on the one hand that its wrong, while on the other can see clearly there are differences in races and cultures making it obvious to me that things are not the same. I don't think I'm racist, but perhaps others may?

So do we deny the existence of the differences? I think that would be wrong and false.

I've recently re-found in my older readings list an interesting quote which I think sheds light onto this subject.

The author said that it is easy to define racism. Racism 'involves treating race as a distinguishing factor when it is irrelevant, or failing to take account of it when it is truly relevant.'

This sums it up nicely, and at the same time exposes the flaw (I'll get to that).

I see that discrimination is a human trait; when you are in the supermarket picking a product out do you grab randomly or do you have a favourite brand which you feel to be better? If you do, then your discriminating between the products. There is nothing wrong with this.

The change to the (perceived) negative comes when you pick based on what is irrelevant rather than the relevant. For example are you choosing the item because of the pretty package or due to known utility or quality?

Now its starting to submerge into murky water, as we've now introduced differing values. Who is to say that my values are more relevant than yours? Probably you don't think so.

I believe that this is what explains why some people in our society remain racist while others are not; the differing value judgment as to what is relevant and what it not.

Ultimately I don't think I'm going to solve this issue in 200 words or so, but perhaps I might get more people (including me) to think about "is this trait relevant to the issue"

:-)

Tuesday 11 November 2008

The Rachel Hunter Principle

Super models are seldom the source of quotation for wisdom, but I think there is something useful in the quote of "It won't happen overnight, but it will happen" which is often attributed to Rachel.

Soon after the the first time I heard this (due to the pervasiveness of the ad), I started calling this the Rachel Hunter Principle. People (back then) were aware of the advertisement and immediately understood the nuances of the "principle".

So remember ... if it seems like a struggle and its not coming together as you'd wish keep in mind that good things take time and work to achieve.


It won't happen over night, but it will happen

Thursday 23 October 2008

the Fasces of Photo.net

Photo.net is perhaps the largest and busiest discussion forum for photography in the English speaking world. People from all over the world come to there to read and discuss all manner of photographs and, increasingly, to use it as a platform to showcase their pictures as much as to learn and help others to learn.

But in an effort to keep things "PC" they are treading down the path of heavily moderating discussion and even wiping out any registered users who they simply don't like. This seems to be becoming remarkably like the "modus operandi" of another group, Fascists.

Things are changing over there, as the site which began as the personal creation of Phillip Greenspun became in late 2007 the corporate property of Namemedia. Now, there's nothing wrong with corporate sponsorship, but there is something wrong when this turns to corporate facism.

Facism as a system, has as a goal to create a society which conforms to its regulations and gives power to administrators (government agents, police, gestapo ...) to anonymously and with impunity remove or delete any item or any person who is interpreted as offending the rules. This constrains what are often basicaly decent people to inflexibly follow rules and systems to in essence execute in-compassionate acts and leads to the removal of whoever is needed in order to maintain the "face" which is required by the rules. The ideas sound good, but look what happened to the "that policial party" in Germany. What started out as a high ideal of a healthy human race (a goal of Eugenics) turned into something else. But I'm sure none of it was based on attempting to victimise any specific person.

In the last few years I've participated in photo.net I noticed occasional grumblings from people who were 'thrown off' the site. I had assumed like any good net-izen that it was for being belligerent or offensive.

However I've found that this is not always the case, as I was thrown off for what began as an honest mistake little more than a small bit of prose that was not critical of anyone and did not degrade or insult anyone. In fact what I did say that was significant was that our work (as subscribers and contributors) to photo.net are their source of richness, which in turn they harvest and we gain not even the rights to enquire about their actions.

So based on that my account was locked evidence of the discussion on the issues were deleted (along with sentiments of approval of the topic) and in communications with the site administrator he shows the compassion of someone who is overworked and under interested in sorting out issues. He even goes so far as to call me a troll. I would be happy to make available to anyone the full communications with the administrator to enable them to decide for themselves.

So with really no recourse to any arbitration the "administration" cancel my subscritption (yep, I had just paid it) and block me accessing my account. Importantly they do get to keep all my contributions as "history" as well as all of my images to increase the "richness" of the site. So as I mentioned in my post (which caused my deletion) I've already produced enough harvest so just weed out that plant before it causes any more problems.

All of this starts to sound like the sort of thing that Augusto Pinochet would approve of.

BTW, if you weren't aware of it, the Fasces is the accepted symbol of Facism. Once the symbol of the Roman Empire (not know for being the most delicate of negociators) it became in the 20th Century the symbol of Facism under Benito Mussolini.

Just like the changes from the initial "manifesto" to that of the regime of Mussolini Photo.net is undergoing changes from what it once was to an as yet uncertain future. So when people are disappearing from Photo.net in the middle of the night for daring to ask "where did my post go" you have to ask what kind of place is it (despite the beautiful exterior and the kind participation by members).

I would really like to know just how many get tossed off because of misinterpretations, misunderstandings or being annoyed by some arbitrary decision at the whim of the Administrator over there in the newly emerging "Fasces" administration. In my case I was not even aware of moderator deletion of my posts because the moderator notification was absorbed by my hotmail spam filters because they were not posting from photo.net. So when I got some smart alec replies from a moderator when I questioned what was happening it naturally annoyed me.

By "running out of town" valuable contributors for trite and insignificant reasons it will drasticaly reduce the potential for meaningful answers (for example, check my profile to see how many contributions I made and the extent to which I often went to assist fellow photographers to learn) . This is not just my fear, as others have been suggesting similar things about the insensitivity of moderation and that it is the contributors who make the site valuable. Of course you can't say much or you'll just get deleted too.

Personally I fear that what was once a good place will descend into a humdrum of nothing more than people asking questions and attracting hits from google and as a showcase for photographs where people can try to flog their wares as a photographer (rather like Flickr).

Still, perhaps as long as it makes money (its becomming an ads fest now days for non-paying-subscribers) for Namemedia then perhaps nothing else matters (to them).

So if you've been kicked off Photo.net for what seem to be unreasonable grounds don't feel alone. Heck post something here and help let people know what sort of place it has become.

Tuesday 14 October 2008

my Tokina 12-24

I have noted that the Tokina 12-24 seems to be rather a brick, weighing much more than my dinky little 17-55 it replaced. It seems that this impression also extends to its construction strength.

I was out taking photographs in Kotka the other day, and while walking around a (I didn't think it was  that) slippery rock slope I slipped and fell flat on the ground.

Since my camera was over my shoulder (with the lens pointing down of course) the camera basically free fell at least a meter from where my shoulder was to the uphill side of me. Naturally the front of the Tokina was the landing zone (ouch). After I found nothing was broken (and I wasn't sliding further down the rock face, I turned to sit on my arse and I looked at the camera expecting to see some damage.

The lens cap now has a nasty mark on it, but the lens seems to be otherwise undamaged. The plastic filter mount seemed to have deformed a little, but I can still thread on a filter. I've tested the lens operations fully and nothing seems amiss. I was still able to take pictures like these:

autumCliffs

kotkaHarbour

I'm sure that with a front focusing lens like on the cheaper Canon's it would have been minced.

I really like this lens on my APS digital camera as it allows me to get the sort of widths I have come to know and love on full frame using 24 and 21mm lenses. I had been lamenting this with my 10D and 20D cameras. Such lack of wides has (until now) sort of kept me using 35mm film cameras (as I can't afford full frame digital right now).

On 35mm I never got used to 28 being wide, and preferred the looks of 24mm, so the 12mm end is welcome. The common 17mm - 55 isn't wide enough for stuff like this (taken on a trip to India)

Its good to have the quick drop into MF for those times when AF goes spakko and you know what to do too.

So there you go ... one more thing to add to the user testing of this lens.

Monday 13 October 2008

scanning colour film with an Epson Flatbed

IMPORTANT NOTE:


there is an assumption in the blog article below that colour management in the options is set to "no color correction" which is essentially off. I now no longer work this way for reasons you can find elsewhere on my blog, but that is not essential to understand here. No matter what, the principle remains the same -> use Assign profile to assign the profile to your image after scanning.

I have realized that I have not explained this functionality well, but I have discovered a preferable way to mange this.

As I made these discoveries after writing this article (and it was also linked to) I did not wish to delete this blog article, but the points below are relevant when doing some other things (which I personally don't recommend like software plugins called colour neg).

Thus it is essential for you to know exactly what you have set in this settings dialog box as this setting before in the Epson TWAIN driver going further.

I have recently discovered some advantages to using the ICM setting (the second option) and have changed my methods back to this.

So in the following article I discuss the assignment with respect to using No Color Correction.

If you use option 2 "ICM" then after you scan into Photoshop you have to assign profile as per what ever the target is in that dialog box (in this case it is Epson ColorMatch RGb). If you were using some of the calibration target systems such asIT8 you would use that, I don't.

I have found that using ICM settings enables some important features:
  1. activation of the Epsons internal calibration systems and allows you to influence how effective scan depth of dark regions of the film by setting sliders in the histogram control.
  2. not activating continuous adaptation to each section you select for scanning. Please see my article on that.

I think that if you wish to be using the option 1 that the correct profile to assign for the Epson flatbed is the Epson TPU profile which comes with your machine (in this case TPU 3200). Note that needs to be assigned, and not converted to when using Photoshop. I recommend that you use option 2 documented above.

Aren't we all so lucky that Epson clearly documents all this.



I've been doing this for ages and I still have as many questions (if not the same ones) as I did back in 1997 when I first scanned a slide with a Nikon LS-1000. Since then I've scanned hundreds of of my images (some several times), read quite a bit, pondered quite a bit and learnd quite a bit. But just to show you that you can still learn something by accident I found out something about how to get better colour scans from my Epson 3200 scanner yesterday.

The problem lies in colour and colour profiles and knowing what is right. A common view is that you should not simply reassign the color space in photoshop (for example with the Assign Profile tool in Photoshop), as this will wreck the appearance. Eg discussions on this site and this site and also this site.

If you don't know much about color profiles (and you're keen to know more rather than just follow my advice here) please read stuff like this. Basically its all about what shade of red we assign to the digital number which we've got that is meant to be a shade of red.

Now, if I have a slide in my scanner when I scan it, it produces data for the computer. If we are using positives (slides, transparencies) then we can either go to the trouble of "calibrating the scanner" (meaning put a slide of known colours and see what numbers we get) or we can ignore the whole thing and just get what we get.

Now if I start with a slide which looks like this:



I can put it in my scanner, and scan it and then end up with what ever I get.


But depending, we might get stuff like this image on the left. Which leaves us wondering just what happened and how to get that looking reasonable on the screen (let alone print the bloody thing).

It looks pretty wild, and while I might like that look its not always what I might want.

In this case I've scanned the image into photoshop and it has chosen to give the image the default profile (which is ProPhoto in this instance).

Now, I haven't gone to the trouble of calibrating my scanner mainly because I mainly scan negatives (and most people will agree that no test targets exist for that area of scanning). However what I did find was that by simply assigning the image to the Epson 3200 TPU profile (installed when I installed the software) it just comes out like the image at the top and not like this garish representation.

To best understand this remember that profiles are not going to have any effect on the scanners data at all. What ever comes from the scanner just comes. So, to get things looking like we think they should (based on our eyes) we need to map those numbers to the right intensity / shade of red green or blue.

Sure the profile generated by software and using a test target will be the most accurate, but for most of us out there I'm willing to bet that the Epson 3200 TPU profile will be 90% right one (or good enough!).

Now here's the thing (and the reason I'm writing this), none of this is mentioned in any documentation I've ever found on the Epson scanner (and I have two of them, a 3200 and a 4870).

So, if you've been tearing your hair out with your Epson flat bed, try looking at the different profiles which exist in your directory. I found these clearly from the Epson installs.

The TPU stands for Transparency Unit. So while I keep my default working profile as ProPhoto, when I scan now, I then assign to the Epson 3200 TPU profile and convert back to ProPhoto.

Perhaps (certainly) this isn't as good as going to the trouble of buying an IT8 calibration target and making my own profile, but heck its good enough for my purposes and (based on my eye) gets me so much closer to the ballpark.

Now this is handy stuff for Positives (transparency) but can it help for Negaitves?

YES ... it can!

With Epson scan I occasionally work by scanning as a positive then inverting manually. There are many who will say its not needed and indeed I don't use it all the time. BUT when I do scan as positive and then invert I've found that by assigning to this color space before inverting I get more consistent results. Don't get me wrong, this is no magic "holy grail" for dealing with Negatives, that remains as difficult as it always has been. This just makes the results a little easier to tame.

My feeling so far is that transparency is simpler to work with as the operator of the scanner, but as the photographer negative will give better results (at the cost of more work) especially with outdoor high contrast scenes.

Feel free to if you have any comments or questions.

Thursday 9 October 2008

The Machine

every now and then something happens which reminds me of the difficulty of dealing with "the machine", and how being part of the machine turns nice people into ... well ... machines themselves.


If you've ever read The "BIOLOGY OF COGNITION" by Humberto R. Maturana you might be more comfortable with the idea that evry organisation is perhaps also a kind of living thing, an organizational organism.

Since the organism does not really exist (only its rules and governance policies), we tend to see only the people themselves who form the substance of the machine. Yet these people (while in their roles, following the rules which are its stuff) are not only doing the work of the algorithm that defines The Machine they are also giving it an ability to interact with the world (our world) and function.

Normally people are oblivious of this fact, but occasionally "things happen" which bring it to your attention. You might have had a clerical error in an accounting system in a large organisation or had a moderator remove your post from a list. If you don't think of it in these terms its easy to get confused and think that some person is causing you trouble. After all, we're all people, we're used to dealing with people, and its a person we see who is representing the organization. A good example of this is brought up in the documentary "the Corporation" (if you have not seen it I recommend it).

A classic example of this is Terry Gilliams movie "Brazil", in which the 'hero' finds himself fighting against people who are just regular policemen and civil servants carrying out their duty dispassionately, and unaware of why it is that anything is wrong.

So when problems occur, the people who are parts of the machine appear to take a contrary stance to another person. Their personal reactions cause them to feel uneasy in being contrary to another person (whom they often don't know) and so they react defensively by "sticking to the rules" (which compounds the situation).

Conciliation and compassion go by the way and we find that previously smiling neighbours can become our hated enemy. At times like this its hard to maintain composure and not feel something against that person who (now) represents the organizational organism and not just a person we know.

The temptation to "rage against the machine" is high. But just as the officials in Brazil aren't guilty of torturing an innocent man ("I got the wrong man delivered to me as the right man ..."), you have to remember that the representatives of the organizational organism are also bound by their association with it, and can be duly punished b it if they don't follow the rules. The reverse however is not true, we as humans have no way to send any message to the machine by punishing it, for it can't feel or perceive that. All we can do is perhaps reprogram the machine (which is much harder than it sounds).

I believe that the root of the problem is that the organisational organizations need to learn how to structure themselves to allow their people to be people and perhaps we'll get along better.



PS: I just found (March 2018) that a quote from a book I read many years ago may have indeed spawned this theory:
“A government is a living organism. Like every living thing its prime characteristic is a blind, unreasoned instinct to survive. You hit it, it will fight back.”
– Ben Caxton (Robert A. Heinlein, Stranger in a Strange Land)

Same is true of sufficiently large corporations. They are all living machines just running a program (their corporate system) like a cell runs the program of its biology. Further reading on that topic in my article Its life Jim but now as we know it.

Wednesday 8 October 2008

walk in the park

I took a walk in the park today and took a leaf out of Edward Westons book today in photographing the colour of autumn.

He's attributed with saying: "Anything more than 500 yds from the car just isn't photogenic." So rather than backpack my stuff anywhere, I went to the local park and looked for some angles. Here's what I took with the digital for my "light metering" shot


autumLeaves

I hope the LF comes out well too (but knowing my luck it'll be the test shot which is best ;-)

Friday 3 October 2008

Epson 3200 more optimal scans

Now, normally everything goes well with easy things, but everything isn't always easy. Sometimes (as if by chance ;-) our exposures on film make scanning a breeze. Other times things work out to cause problems, other times we deliberately seek to make a challenge.

Anyway, the outcome of this experiment taught me something about both my scanner and colour negative film.

  • The scanner seems to respond differently to adjustments in the scanning software (meaning that changes in there are not only software and thus not equal to changes post scanning in Photoshop)
  • Colour negative film is much denser than I'd thought making it as challenging to work with as slide (although in an opposite area -> highlights)
So what did I do?

Recently I was working on 3 images taken for testing how Fuji Pro160S responds to over exposure. I took the shots on an bright sunny contrasty day, and was scanning them with a mind for putting them on my page on setting film exposure with a digital camera. That article also explores how film reacts to light a little as well (or densitometery using a scanner under a different name). Anyway, this image to the left was taken with my digital camera (not altering the exposure it chose) then plugging that straight into the film camera I then took 3 exposures;
  1. equal to the digital camera
  2. +1 fstop
  3. +2 fstop
I was surprised to find that not only did the shadow detail improve (expected) but that the skys continued to have tone (especially visible in viewing the negative on the lightbox). It almost looked like a regular HDRI but without the weird artifacts.

My first scans just contained washed out sky in the +2 exposure. So there was the challenge of scanning this "difficult" negative and getting all of what I could see in that scan onto my file to start working with. This proved to be a bigger test of my scanner than I had thought, and has taught me much about both colour negatives (their dye layers), my scanner and has coalesced much of what I've leant and heard about scanning in the last 10 or so years (as an amateur scanner).

In a previous post I explored the linearity of my (this) Epson 3200 flatbed scanner. In a more recent post about trying to get more optimal exposures and or scans of Negative I began talking to a fellow and in thinking about things and rescanning things I stumbled across an interesting point:

scan times varied with different settings of my scanner.

I had not noticed this before, although I had noticed that covering the calibration area on the scanner does also alter scan times. Some time ago I spent some time fiddling about with this in an effort to appreciate if this makes a difference and published my discussions here on photo.net.

As perhaps you can see (graph from my previously mentioned Blog page) covering the calibration area made little real difference to the response in the darkest areas of the negative. Sure the scanner perhaps increased exposure but as the density got higher (film got darker) the results were approaching the same. Probably the sensor was running out of sensitivity.

So, I went back to just doing things normally (not trying to fool the scanner.

It wasn't until I was testing the software NegPos. I was seeing decidedly more noise in the scans done with it than I was when I did plain "negative" scans using the Epson software to scan my negative as Negative. I thought that this warranted some exploration.

The first thing which is significant here is that NegPos software requires you do a full scale linear scan with your scanner (to make its internals maths easier), while when I scan with Epson scan I tune the the histogram in its software.

I have become sure that speckly noise in dense areas of scans of negatives is caused by scanner noise (things like the sky and clouds, which is also where "pepper grain" noise is located). However I noticed that when tuning the histogram myself I got less of this than with a full linear scan.

So, lets look at my process (and I suggest that you try to repeat theses results yourself).

The question often arises should I adjust my scan in the scanner softare or in photoshop? People argue that there should be no difference because this will result in software doing the same things just in different places.

This is only true if nothing changes about the way that the scanner obtains the data. For example proponents of vuescan will prefer to do a "linear scan" and save the raw data of that (which is essentially scanning as a positive and then inverting).

this next paragaph is complex, so you might need to read it twice:

As well, due to the I've found however that on my Epson 3200, with the driver in the Professional mode, that adjusting the sliders in the scan software further towards the dark area does make a physical change in scanning (I'm sure this will apply to 4870, 4990, V700/750 series scanners as they use the same software as far as I know).

For example a linear full range scan @ 1200 dpi of a segment of negative will take 1min 39 seconds while a histogram adjusted scan of the exact same thing at the same dpi takes just under 5 minutes.

That's nearly double the time. So I suspect that it is doing something like giving the CCD's longer exposure.

To repeat and summarize the above: I gained a change in scan time by just moving the dark slider to force the scanner to scan more of the dark area. This then may effectively be a hardware adjustment.

Lets look for some evidence to see if it may be. To cover any assumptions, below are the two different setting groups that I'm meaning with the discussion of settings. There is the all channel view and the split channel view:


On the left side is a full range linear scan, on the right is also a linear scan, but I have adjusted the individual channels to optimize what is in the range. You scan see they are still linear by the tone curve viewer (although there is much greater contrasts applied because the each cover a different range).

Note: Colour negative film is not like slide film in an important way (aside from being negative), each of the film layers reacts differently to light.

If you look at the chart to the left (which is the response curves for Fuji Pro 160S negative film) you will see that the starting point at the left is denser for blue than it is for red or green light. This is a point which confuses many (and took me some time to grasp too).

Essentially it means that if you expose a grey card as grey then the density (say, at -1 on the axis) for each channel will be different.

Don't glaze over here (as its easy to) as there is no magic to density, it just means how dark your exposed bit is on the negative. Look again at the histograms above and you will see that red is over on the right (indicating that it is not as dark) and blue is over on the left (indicating that it is dark).

So, to set your scan levels appropriate to each channel is exactly what is needed for film (and why simply scanning and inverting will look ugly and need work to fix. Scanner software does this automatically, but I have found it is far to agressive chopping off high light and shadow details.

Note 2: if you change the scanner mode to Film Type: Color Negative Film you will not get a straight line in the tone curve viewer and if you inspect the channels you'll find its more like this. Note that the location of the histograms is on the opposite end of the scale now. Also note the clipping applied (differently) to each channel.



To the left I've simply left it to defaults, to right I've used the Epson "auto exposure" tool. This is why I prefer to scan as positive and invert in photoshop later ... to avoid the software doing what I don't want it to

You can see that it is clipping some of the darker and lighter ends of the negative (probably just to make sure) and adjusting the slope on the gamma (contrast) to be quite steep and is setting different black and white points for each channel.

I could (and sometimes do) manually trim or tune these right here, but I thought that to get the maximum control over this I would scan as positve (so Gamma can remain linear) optimize the channels, and then invert and apply curves as required in my photo editor. I thought that the easiest "quick" experiment was to scan a portion of the neg in three ways:
  • full range linear scan
  • partial range linear scan (that is to reduce how far into the 'light area' I bother scanning but leaving the dark areas untouched)
  • lastly a fully "optimised" scan (where I look at setting black and white points for each R G and B colour channel separately).

To give you some idea of the differences I am seeing I've put below a screen grab of the three blue channel sections I obtained by scanning just this way.



I think you can see that there is impressively less noise in the optimised scan than the others (and the worst is the full linear scan). That there is this difference supports the theory that a scan is not a scan and that its not just the software making the difference.

This is what I got (with some playing with levels and curves myself) from my adjusted VS the Epson auto negative.


So with no effort Epsons stuff produces an OK result. But this negative had been "over esposed" by 2 stops to get better detail in the shadows (not to wash out the sky). So for me it was worth playing with this to keep that sky detail.

So if my theory is correct, and given that ColorNeg works with the full range scan its hardly surprising to find that there is some noise in the blue channel with this scanner. Compare the results of the two scans in the Blue channel:



So, for my scanner this settles the issue that setting the levels properly in the scan does make a difference. Even if I prefer the 'look' or the simplicity of the conversions that the CF software gives, I can't use it if I want to optimize my scans to keep away from the noise in the system.

So I'm comfortable with my workflow here with this scanner.

This is probably enough for most people (wait, I hear someone already crying out "No ... the short answer please!").

But ... for the gear heads among us I thought I'd try to see "why is it so". (the rest can skip reading now ;-)

Lets go back to our old friend the step wedge and see what happens when I alter the scan to make the input range from all R G and B from 0 to 50 (rather than 0 to 255).


Well, for one thing, we loose lots of data up the top there (but then that's not surprising). We can see we also loose linear responce of the sensor as its now gaining a colour cast. But what we really need to know is: is the neg denser than the scanner can penetrate? I think it isn't because when I put them both on the glass and scan them in this way I get the following.
Note that the blue spike is very marginally on the darker edge of where the darkest parts of the blue in the negative lay? This does however mean that colour negative is right on the limits of this scanner (not so for black and white negative though).

Correcting for this shift is non trivial btw, as you'll notice that the spikes are not aligned, this is much less so on a linear scan done more within the limits of the scanner.

If we measure the values of each of the known stepwedge incriments we can check how well the scanner performs optimised in this range. I've plotted this in excel taking a rectangle in the center of each of the steps and plotted this both as a value with a Log value of this (as the steps are in 1/2 stops) to check for its accurate responce. Beside this I've also plotted another graph with the percentage error for each step. This is provided by the standard deviation of the measured rectangle around the median (Photoshop does this for me) as a percentage of the value.



So as we get further past 15, the percentage error starts rising to above 20%. Meaning we can't really rely on the accuracy of the scan here (meaning increased noise). This means that we can't easily rely the points for red green and blue being where we may predict them to be. As I see it we have to balance by eye rather than algorithm. So pale blue skies and bright clouds might be available but not without some work.

Therefore just how we approach getting at the blue channel in the colour negative and how we adjust it carefully will have a large impact on the image quality and on the amount of noise in the skys.


So, now I understand more of why people say "scanning negatives is harder than scanning slides" as well as why colour negatives represent more challenge to scanners than black and white ones.

I would very much appreciate results of such explorations done on other scanners (such as Nikon or Imacon), but I expect that "drum" scanners will have far fewer troubles in this area.

:-)

Wednesday 1 October 2008

colour negative - wondering about getting better images

I once mainly used colour slide as my prefered film but I now commonly use colour negative as my film because I found that even after 12 years of development in scanners when scanning slides I don't get into the shadows very well. In contrast (say, was that a pun?) negative can cope with much greater holding onto highlights than slide can, and so you can tune your exposure to bias exposure to the shadows and expect the highlights to hold. See this example elsewhere on my blog.

Of course Colour Negative works rather differently and instead of getting a "ooohhh" when you see that on the light box you get something like this:


not startling is it ... yet from this surprisingly terrible image, you can pull out the scene below:


Now interestingly, I took a digital of this scene for working on a page I'm writing on exposure of film with a digital camera here, you might find that interesting reading too.


Immediately the colours are more punchy in the digital, but then again we've blown out the clouds to blinkies and there isn't much in the shadows over on the left there (unlike the film).

now, lets look at that area in more detail:


surprisingly good colour (even in the reeds in the shadows). I bet I can't do that with Slides either. Now going back to that horrible looking negative I had up there, lets look at what's in the Red Green and Blue channels (remember we're still in Negative here, so black is white in the finished product).




Despite the RGB looking like a broad histogram, there is heaps in the Red (gosh just look at the bloody thing above) , little in the Green and next to nothing in the Blue.

No wonder the sky is washed out and noisy. So, I'm now wondering if this can be fixed with a scanner which punches more into the dense areas? If so by how much? Perhaps its jut not there at all?? Perhaps the blue channel in the resulting scans of negative are always going to be weak?





I've just had a conversation with a fellow who drives a drum scanner. He says that his device gets into these areas more and has much cleaner results than what he's seen from consumer scanners (gosh why should that be surprising?)

I think that this shows when we look at what happens to the blue channel when we make the level adjustments required to set its black and white points (streching that small data range to cover 0 to 255 effectively).



Notice the numbers and positions of the sliders. In the on the left its as it came from the raw linear scan, and on the right its stretched steps 2 to 35 to cover 0 to 255. It is clear that heaps of noise results. I don't know if this is quantisation noise or CCD noise. But I expect its a bit of both.

The reds in contrast performed much better (well it started out better to begin with)


There was data from 44 to 139 which meant a more modest strech and not to forget that the lower end of the data was further away from the dense areas of the negative and within a more linear and reliable portion of the scanners ability.


So, now I think I understand why people think negs are harder to scan than slides. I wonder if I can get my hands on a linear scan of this neg done with a Nikon?

Tuesday 30 September 2008

micro four thirds

Having come from a period where almost every 'serious' camera I knew of was 35mm (and Box Brownies were just lame) I looked at camera size as being only a thing about system camera VS non system camera. One of my favourite cameras was the Olympus Trip 35. These compact little cameras could take outstanding images with their simple but sharp fixed focal length lens you could take images excellent images with a compact camera that sat easily in your pocket or brief case. My good friend took just such an image like this back in 1974:




This image makes stunningly beautiful prints up to well beyond A3 sizes. If you click it the image which loads is 1600 x 1044 pixels, but scanned on a Nikon LS-5000 makes images easily 5000 pixels wide and beautifully sharp.


Now we're strongly in the digital era, and having been a fan of compact cameras (like my Coolpix 5000) since I started using them back in 2000. The up until the 2MP camera they weren't much chop for prints anything bigger than 5x7 inches. But the 5Megapixel 5000 changed that (see this dpreview review for details), now digitals were as good as what I could easily get from 35mm (and then only with the best scanners or professional enlargements). Pretty soon I was barely taking my 35mm outfit anywhere with me (or if I was, I was leaving it in the backpack more often than not).

You see now days I've learnt that when I want a "really" high quality image, I pull out my 4x5 camera. It has film which is so enormous after looking at 35mm its just ridiculous to consider using 35mm anymore. In fact since I've got a DSLR (great for sports and birds) I can't think what I'd do with a 35mm film camera anymore.

So I now carry my compact digital and my bigger format film cameras with confidence that I can get an excellent print image or simply satisfactory www image no matter what. But the camera makers gradually ruined that with the polarisation of digital "prosumer" cameras into gumby compact cameras or large DSLR cameras. Compact cameras have increasingly smaller sensor and higher megapixels. Leading to lower and lower image quality. Damn! Just when I get used to quality image making cameras not being bulky. So I'm stuck with my 7 year old (and getting older all the time) Coolpix 5000.


But then there was the Micro 4/3's announcment from Olympus / Panasonic. Better yet, Olympus have posted this. Boy it looks sweet too: This image is linked from Ken Rockwells site


ouhhh

and this one from DPReview:



So it looks like my (and many others) hopes are likely to be fulfilled. A compact camera which will make images as good as compact 35mm once was and be as compact (or more compact) to carry as they were too!

Fantastic

Sunday 28 September 2008

Metz on my Coolpix - newer isn't always better

I've had my Coolpix 5000 for some years now, and it still pulls rabbits out of the hat when it comes to being a versatile imaging tool. I recently bought a Metz 32 CT-3 (an old favorite flash of mine, used for many years before going EOS and then A-TTL) and sure enough works atop the little coolpix like a bought one!


I grew up using flash which required me to use a table on the back of the flast to calculate the right exposeure (distance - film ISO - aperture f-stop) so when "auto flash" came along it seemed to take all the hassle out of things cos all I had to do was set my aperture to match what the flash "thought" it was an it just worked. Especially in combination with a camera with an Av setting it almost perfect.


Sitting it ontop of my EOS 10D helps understand the scale, actually it works fine here too and if you've used any of the EOS EZ flashes it has more punch with a wide lens than any of them, because they fudge the guide number with an internal zooming mechanism. A flash like a 550EX may be GN55 at 105mm but when you put on a wide angle they're back to about 17.

If you think this looks 'chunky' on top of my 10D wait till you put a Canon flash ontop of your Rebel..



Anyway, the Metz is great as it has fully featured abilitys, like swivel left and right (as seen below)


or the front of the flash element can pivot all the way to straight up like this.




Which enables you to get bounce flash from almost any angle or situation.

Of course all this is now available for you on the Coolpix too. Who says that 'compact cameras' have to be limited.



Its funny, the flash is nearly bigger than than the camera. So I can now get excellent lighting with bounce flash (which all these are) and certainly better lighting options than the coolpix built in flash.

This image below shows how much more 'even' and natural the lighting provided is compared with the flash pointed straight at the subject like a search light.


So a 20 year old flash on top of my old Coolpix gives it even more versatility than it had before. Its small when I prefer to have only the compactness and it can take an accessory flash to give it professional punch when I need it.

People often buy DSLR's because they perceive that they are some how more versatile. The soon find that the dinky flashes that pop up on their DSLR are not better than the ones that compacts have and end up buying and expensive system flash (which are often bigger than this flash unit).

Why don't they keep making stuff like this?